How To Toro Lawn Mower Repair

Toro is 1 of the most pop lawn mowers. Just like whatsoever machine, there may come a time when yours does not perform properly. Y'all could call in a repair representative from your local Toro lawn mower dealer to check your mower out. Nevertheless, information technology is more than cost effective to do information technology yourself. Moreover, it is not a difficult task.

A Toro lawn mower. Courtesy: Cavalier92

If your Toro lawn mower does not perform properly, the start thing you need to do is bleed that gasoline from it and re-fill information technology with fresh gas.

To perform this task, you volition demand a hand siphon that you can buy from a Walmart, Amazon, eBay or Home Depot.

To siphon the gasoline out of the mower fuel tank:

Push the lawn mower to a level place and put a container that is authorized to hold gasoline adjacent to the mower.
Insert the straight portion of the paw siphon into the mower fuel tank and identify the flex hose of the siphon into the container.
Squeeze and release the bulb on the top of the siphon to withdraw the gas from the mower into the container.
Remove the siphon when all the fuel has been removed from the mower'south fuel tank.
Locate the carburetor bowl drain nether the carburetor if your lawn mower has a bowl bleed. The bowl bleed looks like a small cup with a screw slightly off center on the bottom of the cup.
Put a plastic cup under the spiral of the bowl drain.
Loosen the screw with a wrench and allow the pocket-size corporeality of fuel to drain into the cup.
Tighten the screw dorsum onto the bowl.
Empty the loving cup of gasoline into the container.
Run the mower until the concluding remnants of the gasoline are gone.
Refuel the tank with fresh gasoline.

To proceed the troubleshooting, remove and examine the air filter and spark plug and replace items that appear to be extremely muddy or worn.

If you own an electric Toro lawn mower, plug it in and charge information technology until the indicator light is green, and so audit the fuse located backside the battery compartment and replace it if it is blown out.

Now examination the mower.

If the Toro lawn mower isn't cutting properly, disconnect the spark plug and prop the mower up.

Put on a pair of gloves and then inspect the cutting blade and tighten the bolt in the center of the blade if it is loose.

Examine the edge of the cutting blade to brand certain that it is properly sharpened and non damaged. If the bract needs sharpening, sharpen information technology with a metal file. If it is damaged or too dull to sharpen, then replace information technology.